Service Navigation; Introduction; About Lead Free Solder (Pbf) - Panasonic VDR-D100EB Service Manual

Hide thumbs Also See for VDR-D100EB:

Table of Contents

1 Service Navigation

1.1.

This service manual contains technical information which will allow service personnel´s to understand and service this model.

Please place orders using the parts list and not the drawing reference numbers.

If the circuit is changed or modified, this information will be followed by supplement service manual to be filed with original service

manual.

1.2.

Distinction of PbF PCB:

PCBs (manufactured) using lead free solder will have a PbF stamp on the PCB.

Caution:

· Pb free solder has a higher melting point than standard solder; Typically the melting point is 50-70°F (30-40°C) higher.

Please use a high temperature soldering iron. In case of the soldering iron with temperature control, please set it to

700±20°F (370±10°C).

· Pb free solder will tend to splash when heated too high (about 1100°F/600°C).

When soldering or unsoldering, please completely remove all of the solder on the pins or solder area, and be sure to heat the

soldering points with the Pb free solder until it melts enough.

All manuals and user guides at all-guides.com

Table of Contents

Vdr-d100eg Vdr-d150e Vdr-d150eb Vdr-d150ee Vdr-d150ef Vdr-d150eg ... Show all