Power Saving Led Connector: Jgl1 - MSI MS-6318 Manual

Chapter 2

Power Saving LED Connector: JGL1

JGL1 is connected to a power saving LED. There are two types of LED
that you can use: 3-pin or 2-pin (ACPI request) LED. If connected to a dual
color LED, the LED light is green when system in turned on, and turns to
orange color while entering the sleep state. For single color LED, the LED is lit
when system is on, and blinks during the sleep state.
3-Pin LED
Green Color
1
Green: Full-On Mode
Orange: Sleep Mode
2-Pin LED
Green Color
Orange Color
1
3
Dual Color
2-20
1 PLED1
Suspend LED
GND
JGL1
Orange Color
3