Olympus VISERA Quick Reference Manual

VISERA UHD 4K Camera System Quick Reference Guide
Disclaimer: Information provided in this guide is not exhaustive. Please refer to the complete Instructions For Use for each
item of equipment which should be thoroughly read and understood prior to handling, use and storage of the equipment.
Switch On
Switch on the camera system using the workstation master
switch which will then turn from white to green.
There is a secondary power switch on the transformer
under the workstation. This should remain switched on.
Issue 1
05/02/2021
Camera Head
Insert the camera head into the camera processor,
ensuring the connector is the correct way up.
Video connector
UP mark
Electrical contacts
Optical connecting part
UP mark
Video connector
Video connector socket
The colour bars on the monitor will now be replaced with
an image from the camera head.
Light Source
Connect the light guide cable to the output.
Output socket
If required, place the lamp onto standby by pressing and
holding the lamp button.
Lamp indicators
Control panel
Lamp button
Emergency
lamp
Press the brightness mode button to select Auto.
Brightness mode
indicators
Brightness mode
button
Warning: When turning ON the light source, never allow
the distal end of an endoscope or a light guide cable to
come in contact with the patient and/or other flammable
materials, such as operating room drapes. Patient injury
and/or a fire can result.
KMF-08930
NCDR 02868