Daikin FTXM09VVJU Service Manual page 27

Si042153E
Step
5 Release the harness
from the hook at the
bottom frame and
detach the snap band.
6 Loosen the screw of the
fan rotor, and then pull
the fan motor to remove
it.
7 Remove the rubber
cushion from the fan
motor.
8 Lift the fan rotor up and
remove it.
Removal Procedure
Procedure
Rubber cushion
Hook
Snap band
(R26127)
 Be careful not to drop the
Fan motor
 When reassembling, tighten
Fan rotor
(R26128)
OK
(R26129)
(R26130)
Fan Rotor / Fan Motor
Points
screw into the fan rotor.
the screw in line with the
recessed part of the fan
motor shaft. If the shaft and
the screw are out of
alignment, the shaft may be
deformed and the fan motor
may not be able to be
removed.
NG
Shaft Shaft
(R26225)
25