Daikin FTXM09VVJU Service Manual page 22

Vertical Swing Motor
Step
2 Detach the snap band.
3 Remove the 2 screws,
and then remove the
gear case.
4 Turn the gear case,
unfasten the 3 hooks
and open the gear
cover.
5 Remove the gear and
gear rack.
6 Unfasten the hook and
open the motor cover.
7 Remove the screw, and
then, the swing motor
for vertical blade.
8 Disconnect the
connector.
3. Remove the vertical blade
ASSY.
1 Unfasten the hooks,
and then remove the
center shaft.
20
Procedure
Gear case
Snap band
Gear cover
Gear
Hook
Swing motor for
vertical blade
Hook
Center shaft
(R26115)
Gear rack
Hook
(R26116)
Motor cover
Hook
(R26117)
 It is necessary to unfasten all
hooks in order to remove the
Hook center shaft.
 The number of vertical blade
ASSY and hooks on the
blade varies depending on
the models.
(R26113)
Si042153E
Points
Removal Procedure