Advertisement
PLANNING
POSITION OF THE REAR WALL
Necessary requirements for stability:
rear wall
- a total of at least 2/3 of the cabinet height
- rear wall at top edge and bottom edge
- possible variants:
1/3
1/3
1/3
96 grid / 5 mm holes.
No continuous row of hole.
Holes only at the positions where a shelf is placed.
For the shelves, shelf support expanding socket are
used.
1_
Planungshilfe
Rückwandposition
Shelf width + 10 mm
2_
Top shelf
Construction shelf
Construction shelf
Bottom shelf
13
Advertisement
