Reheat Function - Breville THE SMART OVEN BOV800XL /A Instruction Booklet

OpERATING YOUR BREVILLE SMART OVEN™ — COOKIE
NOTE:
It may be necessary to lightly grease
or line the enamel baking pan with
baking paper to prevent cookies
from sticking.
NOTE:
Caution should be exercised
when using metal foil to cover
accessories, pans, and dishes.
Be sure that the metal foil is fitted
securely as close contact with the
oven's heating elements can cause
overheating and risk of fire.
NOTE:
When using metal foil to cover
accessories, pans, and dishes, it is
recommended that the wire rack be
in the middle or bottom location.
NOTE:
Caution should be exercised when
using pans and dishes constructed
of materials other than metal. If
using ceramic or glass pans or
dishes it is important that they are
oven safe to prevent cracking.
NOTE:
Caution should be exercised when
using lids in the oven, as pressure
build up in a covered pan or dish
may cause hot ingredients to expel
or the dish to crack.
8. After the PREHEATING alert has
sounded, the timer will automatically
begin to count down in one minute
increments. The temperature and time
can be adjusted during the baking
cycle by turning the corresponding
TEMPERATURE and TIME dial.
36
9. At the end of the cookie cycle, the oven
alert will sound three times. The START/
CANCEL button surround will no longer
illuminate red and LCD screen will
illuminate blue.
THE OUTER SURFACE OF THE
OVEN, INCLUDING THE OVEN
DOOR, IS HOT DURING AND
AFTER OpERATION. ALWAYS
USE pROTECTIVE HOT pADS
OR INSULATED OVEN MITTS
WHEN INSERTING, REMOVING
OR HANDLING ITEMS FROM
THE OVEN.
10. The cookie cycle can be stopped at any
time by pressing the START/CANCEL
button. This will cancel the cycle. The
button surround illumination will go out
and the LCD screen will illuminate blue.
OpERATING YOUR BREVILLE SMART OVEN™ — REHEAT

REHEAT FUNCTION

Elements
Top and bottom heating elements cycle on
and off to regulate the correct temperature.
The top middle element is off.
Rack position
Bottom rack height position.
Optional Settings
CONVECTION button
TEMPERATURE CONVERSION button
The REHEAT function is ideal for reheating
leftovers without browning.
1. Insert the wire rack into the bottom rack
height position. The wire rack should
be positioned with the spokes facing
upwards.
2. Place food on the Breville enamel baking
pan or in an oven-proof dish, then place
on the center of the wire rack so air flows
around the sides of the food.
NOTE:
Caution should be exercised
when using metal foil to cover
accessories, pans, and dishes.
Be sure that the metal foil is fitted
securely as close contact with the
oven's heating elements can cause
overheating and risk of fire.
NOTE:
When using metal foil to cover
accessories, pans, and dishes, it is
recommended that the wire rack be
in the middle or bottom location.
NOTE:
Caution should be exercised when
using pans and dishes constructed
of materials other than metal. If
using ceramic or glass pans or
dishes it is important that they are
oven safe to prevent cracking.
NOTE:
Caution should be exercised when
using lids in the oven, as pressure
build up in a covered pan or dish
may cause hot ingredients to expel
or the dish to crack.
3. Close the oven door.
4. Turn the FUNCTION dial until the indicator
on the LCD screen reaches the REHEAT
function. The top figure on the LCD
screen indicates the preset temperature
of '325°F', while the bottom figure on the
LCD screen indicates the preset time of
':15 MINS'. The preset CONVECTION
setting will also be displayed.
5. The reheating temperature and time
can be adjusted before or during the
reheating cycle.
37