Sony LSPX-S3 Help Manual page 40

Glass sound speaker

Hide thumbs Also See for LSPX-S3:

Table of Contents

Sound example

Start playback on the BLUETOOTH device, and adjust the volume to moderate level.

Press the -/+ (volume) buttons on one of the speakers to adjust the volume.

Volume adjustment of one speaker is reflected in the other.

For stereo playback, the speaker with the flashing (BLUETOOTH) indicator is set to the left channel (left side).

To swap the left (left side) and right (right side) audio channels

You can use "Sony | Music Center" to swap the left (left side) and right (right side) audio channels.

Before the left (left side) and right (right side) audio channels are swapped, you hear voice guidance, "Left/Right."

Hint

When making or receiving a call, only operate the speaker in which the (BLUETOOTH) indicator lights up.

If any other BLUETOOTH device(s), such as a BLUETOOTH mouse or BLUETOOTH keyboard, is connected to the

BLUETOOTH device that is connected to the speaker, there may be distorted sound or noise in the speaker output. In this case,

terminate the BLUETOOTH connection between the BLUETOOTH device and other BLUETOOTH device(s).

When using the Stereo Pair function, the codec automatically switches to SBC.

Turning off the speaker does not terminate the Stereo Pair function. When the speaker is turned back on, it attempts to establish

a connection for the Stereo Pair function. To use the Stereo Pair function, turn on the other speaker within 1 minute.

While the BLUETOOTH standby function is activated both on the 2 speakers, however, turning on either speaker also turns on

the other automatically and establishes a connection for the Stereo Pair function between the 2 speakers.

Note

After you restart either of the speakers while the Stereo Pair function is activated, be sure to press the (BLUETOOTH)/

PAIR (Stereo Pair) button on the other speaker to terminate the Stereo Pair function. If you continue to use the speaker without

terminating the Stereo Pair function, you will have a problem, such as a failure to establish a BLUETOOTH connection or a sound

interruption.