Table of Contents
Advertisement
Help Guide
Glass Sound Speaker
LSPX-S3
Connecting with a computer via a BLUETOOTH connection (Mac)
Pairing is the process required to mutually register the information on BLUETOOTH devices to be connected wirelessly.
It is necessary to pair a device with the speaker to be able to make a BLUETOOTH connection for the first time. Perform
the same procedures to pair to other devices.
Supported operation systems
macOS Catalina (version 10.15)
Do the following before starting.
Place your computer within 1 m (3.2 ft) of the speaker.
Connect the speaker to an AC outlet via a USB AC adaptor (commercially available). Or charge the built-in battery
sufficiently.
Prepare the operating instructions supplied with the computer for reference.
To avoid any sudden loud sound output from the speaker, turn down the volume of both the BLUETOOTH device and
the speaker or stop music playback.
Depending on your computer, turn on the built-in BLUETOOTH adaptor.
If you do not know how to turn on the BLUETOOTH adaptor or whether your computer has the built-in BLUETOOTH
adaptor, refer to the operating instructions of your computer.
Set the speaker of your computer to on.
If the speaker of your computer is set to
When the speaker of your computer is set to on:
Turn on the speaker.
1
Check the status of the (BLUETOOTH) indicator on the bottom of the speaker.
2
When the indicator is double flashing
(mute), sound does not output on the BLUETOOTH speaker.
26
Advertisement
Table of Contents
