Contec CONPROSYS CPS-CNT-3202I Reference Manual page 37

2
Unlock the hooks of the module.
If the hooks are stuck, use a slotted screwdriver to unlock.
3
Engage the side rail of the setting module to the side rail of the controller (or another module)
that is already mounted.
When the rails fit, slide the setting module all the way toward the DIN rail.
4
Fix and secure the module on the DIN rail by locking the hooks.
—
Installation
CPS-CNT-3202I Reference Manual (Hardware)
— 37 —
—
Module side rail
山路を登りながら
Controller side rail