Contec CONPROSYS CPS-CNT-3202I Reference Manual page 34

 Ambient Temperature
The ambient temperature is decided from the multiple measurement points which are a 50mm-
distance from the product.
During the operation, adjust the air current to make certain that the temperatures measured in the
points stay within the specified temperature. (-20 - +60°C)
Configurable controller and module(s)
Front
50
mm
Note that although the ambient temperature is within the specified range, an operational

malfunction may occur if there is other device generating high heat; the radiation will
influence the product to increase its temperature.
Do not install this product into the fully-sealed space except the case in which the internal

temperature is adjustable by equipment such as air conditioner. Long-term usage might
increase the temperature of the product and lead to malfunctions or other troubles.
When using the product in a high temperature environment, its life time will be shorten.

Perform the forced air cooling to counteract.
—
Installation
CPS-CNT-3202I Reference Manual (Hardware)
Temperature measurement point
50
mm
50
mm
50
mm
CAUTION
— 34 —
—
Side
50
mm
*
Temperature measurement points are
shown as circles.