Power Saving Function; Adjustment Of Brightness - Pro XK3190-DS3 Operation Command

XII. Input Method of Saving Tare weight
The indicator can save 1000 tare weight for a long time. Three input modes are as follows,
1. Input tare with number keys: (* is the original setting value) (Table 3-8)
Step Operation
1
Press [Vehicle
No.]
2
Input the
vehicle no.
Press [Input]
3
Input the tare
Press [Input]
4
2. Tare saving by weighing
Under tare displaying state, load an empty vehicle on the weighing platform, wait until the scale is
stable, press [Tare Storing], input the vehicle number and press [Input].
3. For saving a group of weighing record, if there is no memorized tare weight of the vehicle number
in memory of the indicator, the tare value of this group recorded will be regarded as memorized tare
of the vehicle and saved in memory.
XIII. Power Saving Function
When the function of power saving is set as valid, the indicator will automatically come into
power saving state after at null position (before tare) for 30 seconds (LED display is off and state
indicating sign maintain). At this moment, it will be back to normal display state by pressing any key
or getting out of the null position state.
See information about setting of power saving in contents about parameter Y in print setting)
XIV. Adjustment of Brightness
XK3190-DS3 has 6 levels of brightness for adjustment.
Press [Brightness] once to adjust the brightness to a higher level. When the brightness is adjusted
to the highest level, the buzzer will send out a long alarm sound to remind the operator. At highest
brightness level, the brightness will be darkest by pressing [Brightness] again. Repeat this procedure
for proper brightness.
XV. Switch between Gross Weight and Net Weight
Under weighing state, when there is tare weight(net weight displaying state), the indicator may be
switched to gross weight displaying state by pressing [Gross/Net Weight] and then switched back to
the original net weight displaying state by pressing [Gross/Net Weight] again.
After tare or preset tare weight, the indicator enters into net weight displaying state automatically.
When there is no tare weight, the indicator will stay under gross weight displaying state and the
key [Gross/Net Weight] will be invalid.
X K 3 1 9 0 –DS3
Displayed content
Under weighing and
displaying state
[o *****]
[o 35790]
[P *****]
[P 01000]
Return to weighing and
displaying state
(15)
Note
Input the vehicle number, e.g.: 35790
Input the tare, e.g.: 1000(kg)
End