Table of Contents
Advertisement
Step
Note: (1) When using an external printer, types of printers are 1, 2, 3, 4 and 6 according to different
style of printers.
(2) Steps 8 and 9 are only applicable to printers of type 2 and 3 Instead of others.
▲! Discount rate will be selected only when the print format is filled-in.
★ See detailed printing forms in appendix.
★ Special format carbon-free duplicating and typing paper can be used for Filled type printing
for quick print in triplicate. Special format normal typing paper may also be used for quick
print in one copy.
★ For commanding filled type printing of special format, please contact the distributor.
2.
Data saving and printing of the indicator are conducted at the same time. Press [Print], you may
print the weighing record while a complete group of record is saved (setting of printing have to be
valid).
3.
For printing failure of weighing record caused by some reasons (for example, printer fault),
current record may be printed by press [Suppl Print] after relevant fault is removed.
4.
After weighing, you may press [Accumulated Printing] to print the accumulated recording amount
of this group.
5.
When twice weighing and printing mode is set in the indicator, with the twice saving method of
empty vehicle at first and then heavy one or heavy vehicle at first and then empty one, as the
record is still not complete during the first time of saving, [LoAd] will be displayed on the
indicator for about 1.5 seconds for reminding the operator. However, printing will not be
conducted now. At this moment, you may press [Suppl Printing] to print the incomplete record
out.
Results of printing will always be: 1,Serial no.:blank;
(See information about setting of twice weighing and printing mode in contents about parameter Y in
printing setting)
6.
When once weighing and printing mode is set in the indicator, data for each time of weighing will
be saved and printed as a complete record. Under tare state, the indicator will regard current tare
weight as the one to be recorded. If not, the indicator will call the corresponding memorized tare
weight saved in indicator and regard the value as tare weight to be recorded (tare weight will be
recorded as 0 if there is no memorized tare weight). See information about setting of once
weighing and printing mode in contents about parameter Y in printing setting.
IX. Report Printing
1.
Press [Report], input the date and press [Input] to print daily report
statistics (i.e. statistical form made according to time sequence, vehicle number and article
number).
2.
Press [Report] and [1] to print summary report 1 (i.e. statistical form made according to time
sequence)
3.
Press [Report] and [2] to print summary report 2 (i.e. statistical form made according to vehicle
number)
4.
Press [Report] and [3] to print summary report 3 (i.e. statistical form made according to article
number)
5.
Press [Report] and [4] to print summary report 4 (i.e. tare report made according to vehicle
number)
X K 3 1 9 0 –DS3
Operation
Displayed content
End of operation
2,Gross W, net W:0
3,Tare W: Current display
(11)
Note
rd
3
digit: 0 Unit of weight is kilogram
1 Unit of weight is ton;
th
4
digit: 0 Do not use article number in
data record
1 Use article number in data
record;
th
5
digit: 0 Do not use vehicle number in
data record
1 Use vehicle number in data
record;
E.g.: Select 00011
n the basis of classified
o
Hide quick links:
Advertisement
Table of Contents
