PURE Evoke Series User Manual page 13

Now playing information
While the stream is playing, the screen shows its name and description. If artist and track
information is available, this is also shown. To view further information, press Info.
Each time you press Info, another set of information is displayed, cycling through the following
details:
Slogan (default; where available)
Language/Location
Codec and sampling rate
Playback buffer
Today's Date.
DAB
To enter DAB mode, press Source and tap Source until DAB radio is highlighted. Press Select to activate.
You can also use the Navigation Arrows to select your source.
DAB
Radio 1
Music for
a new generation
Scanning for stations
The first time you use your Evoke, or if the station list is empty, the radio automatically
performs a full scan to see what stations are available. You may also need to start a scan
manually to update the list of stations for one of the following reasons:
To do a scan Select Menu > Scan.
Once a scan is complete, the radio returns to playing the previously-selected station or
first station on the station list.
To remove stations that are listed but unavailable Select Menu > Prune Invalid.
Manual tune
As well as the normal method of scanning, you can also manually tune to a particular
channel / frequency. This can be useful for adjusting your antenna to achieve the best
possible reception and scanning a particular channel to update the station list.
To manually tune Press Menu > Manual tune then use the select control button to display
a particular channel/frequency, press Select to tune to that channel/frequency.
The display shows a live indication of the received signal strength on the selected
frequency.
Adjustments to your antenna will be manifested in the received signal strength
displayed.
Note: The division in the signal strength bar indicates the audio quality threshold – if the
signal strength, as indicated by the solid rectangles, falls below this threshold the audio
quality will deteriorate.
When a channel/frequency is selected your Evoke also scans for any DAB stations on the
selected frequency and updates the station list with any new stations found. To listen to
any stations found return to the Now playing screen.
18:30
New stations may become available from time to time.
If reception was not good for the original scan (for example the antenna
was not up), this may result in an empty or incomplete list of available
stations.
If you have poor reception of some stations causing the audio to break
up, you may wish to list only stations with good signal strength.