Advertisement
SOUND SUPPRESSOR MODEL BLACKSIDE-40
Failure to follow installation and maintenance instructions
detailed in this manual can result in potential for serious
injury to the user and damage to the weapon. Firearm sound
suppressors are user attached fi rearm muzzle devices, and as
such are subject to improper attachment unless the proper pro-
cedures outlined in this manual are followed.
The manufacturer is not responsible for improper usage of this
product. This product is potentially dangerous, and as such it is the
user's responsibility to understand and implement its proper use. If
you do not understand the instructions in this manual, please contact
the manufacturer for further clarifi cation.
The model BLACKSIDE-40 sound suppressor is designed to operate
fl awlessly with the majority of autoloading pistols chambered for the .40
S&W cartridge. It is a physically small suppressor for the size cartridge, and
it gains its remarkable effi ciency through the use of artifi cial environment
technology. To better understand this unit, please take a few moments to
read this manual.
This suppressor is capable of reducing the sound level of the .40S&W
cartridge by up to 30 dB through the use of the proper artifi cial environ-
ment. Artifi cial environment is defi ned as a consumable foreign substance
(liquid or paste) inserted into the suppressor to reduce sound by rapidly
absorbing heat from the propelling gases. Completely dry, the suppressor
is hearing safe.
There are a variety of substances which will function well as an arti-
fi cial environment including light oil and automotive grease. Each has its
advantages and disadvantages, which are related to effi ciency, durability,
and smoke signature. Specifi c artifi cial environment materials are dis-
cussed later.
Because of the geometry of most .40S&W handguns, the BLACK-
SIDE-40 by default is provided with the Gemtech Linear Inertial Decoupler
(L.I.D.), which functions as a recoil booster. On special order, it can be
provided with a normal, non-boosted threaded endcap.
WARNING
MANUFACTURER'S DISCLAIMER
INTRODUCTION
P.
2
Advertisement
