Cleaning And Care; Delivery Set; Technical Specifications - Maxwell MW-1985 Manual Instruction

add the water to the base (8) up to the mark
«MAX» (6).
• The cooking time depends on the prod-
ucts used.
• Before eating make sure that the food is
cooked through.
• Remove the products from the grid (1) right
after frying; keeping products on the grid
(1) for a long time during the unit operation
can cause their burning.
Place the grill on a flat, stable surface away
–
from sources of moisture, heat and open
flame and with free access to the mains
socket.
Place the grill keeping at least a 20 cm gap
–
between the grill base and the wall and
30 cm of space above the grill.
Do not place and do not use the grill
–
near highly inflammable objects or liquids
and objects subject to thermal deforma-
tion.
Use the grill in places with proper ventila-
–
tion.
Make sure that the base (8) is filled with
–
water up to the mark «МАХ» (6).
Oil the grid (4) slightly and install it to the
–
installation place (2).
Note:
during cooking you can install the grid (4)
–
into the openings (2) in the base (8) or lift
it higher by installing the grid (4) into the
grooves (2) in the base (8).
Insert the power plug into the mains
–
socket, set the temperature control knob
(9) to the necessary position (selected
by the user), the light indicator (10) will
light up.
When the heating element (7) heats up to
–
the required temperature, the light indi-
cator (10) will go out and you can start
cooking.
Carefully put the products on the grid (4),
–
avoid burns by possible splashes of juice or
fat dripping from the products.
Attention! During the operation the
heating element (7), the grid (4) and
the upper part of the base (8) heat up
strongly; do not touch hot surfaces to
avoid burns.
IM MW-1985.indd 9
Do not place the products on the grid (4)
and do not turn them with bare hands, use
the kitchen tools.
When the products are ready, remove them
–
from the grid (4).
Put the cooked products into a suitable
–
container.
When the light indicator (10) goes out, you
–
can continue cooking.
After you finish cooking, set the tempera-
–
ture control knob (9) to the position «MIN»
and unplug the unit.
Before cleaning the grill wait until it cools
–
down completely.

CLEANING AND CARE

Clean the grill after every use.
–
After you finish using the grill, switch it off
–
by setting the temperature control knob (9)
to the position «MIN», and unplug the unit.
Remove and clean the grid (4), wash the
–
grid with water and neutral detergent, rinse
and wipe dry.
Remove the heating element, make sure
–
that the heating element (7) has cooled
down. Wipe the heating element (7) with a
soft, slightly damp cloth and then wipe it dry.
Drain the remaining water from the base
–
(8), wash the base with warm water and
neutral detergent, then wipe it and let it dry.
Do not use abrasives, solvents or steel wool
–
to clean the grill.
Do not immerse the heating element (7),
–
the power cord and the power plug into
water or any other liquids.
STORAGE
• Clean the grill before taking it away for stor-
age.
• Keep the grill in a dry cool place out of
reach of children and disabled persons.

DELIVERY SET

Grill assembled – 1 pc.
Manual – 1 pc.

TECHNICAL SPECIFICATIONS

Supply voltage: 220-240 V ~ 50 Hz
Rated input power: 2000 W
9
ENGLISH
24.07.2018 11:52:28