Operation; Basic Weighing - Detecto 8435 Owner's Manual

Do not leave the baby unattended in the baby tray. Failure to
maintain continual control of the baby can result in serious
injuries should the baby fall from the baby tray.

Basic Weighing

1. Place scale on a level, stable surface.
2. With the baby tray empty, press the
ON/OFF key to turn on the indicator.
3. If required, press the ZERO key to zero
the weight display.
4. Lay the baby being weighed in the
center of the baby tray. This will
distribute the weight evenly across the
scale platform.
5. When the weight is stable (STABLE
annunciator will turn on), read the
weight display.
6. If a printer is connected to scale, press
the PRINT key to print a ticket.
7. Remove the baby from baby tray.
Zero Weight Display
1. If the indicator display is not showing
zero weight, press the ZERO key.
2. Weight display will return to zero. ZERO and STABLE
show a stable, center-of-zero ( 0 ) weight condition.
Zero Weight Display with Item on Scale
1. Place the item (blanket or similar covering) on the scale.
2. The display will show the weight of the item on the scale.
3. Press the ZERO key.
4. The weight display will return to zero. ZERO and STABLE
The weight of the item has been "zeroed off".
5. Lay the baby being weighed in the center of the baby tray. This will distribute the weight
evenly across the scale platform.
6. When the weight is stable (STABLE
display.
7. If a printer is connected to scale, press the PRINT key to print a ticket.
8. Remove the baby from baby tray.
6

OPERATION

CAUTION!
annunciator will turn on), read the weight
8525-M316-O1 Rev B 8435 Owner's
Figure No. 10
annunciators will turn on to
annunciators will turn on.