Miele CVA 7440 Operating And Installation Instructions page 60

Cleaning and care
 Press the retainers on the left and
right-hand sides of the milk valve
holder and pull the holder forward to
remove it.
 Take the holder and silicone seal
apart.
60
 Pull the stainless steel bolt upwards
and out.
 Clean the individual components of
the milk valve in the dishwasher.
Useful tip: If there are any dry milk
residues on the front, soak the stainless
steel bolt in warm water and a little dish
detergent.
Installing the milk valve
 Insert the stainless steel bolt from
above.
 Insert the silicone seal into the milk
valve holder.
 Insert the holder and silicone seal
until they audibly click into place.