Connecting The Turbocharger - ABB A238-H Series Original Assembly Instructions

Assembly Instructions / A200-H
4 Installing the turbocharger / 4.6 Connecting the turbocharger
4.6

Connecting the turbocharger

Connect the cable to the speed sensor (86515).
u
Connect all exhaust gas, water, blow-by and air lines according to the instructions of the
u
enginebuilder.
Version with compressor wheel cooling
CAUTION
Failure of compressor wheel cooling
Any prolonged failure of the compressor wheel cooling will shorten the re-
placement interval of the compressor wheel.
Make sure there is an uninterrupted supply of cooling air during opera-
u
tion.
Fig. 13: Connecting the compressor cooling air
Remove the lock from the connection for the compressor wheel cooling (01) and fit the
u
cooling air line.
© Copyright 2021 ABB. All rights reserved. HZTL455311P0042_EN Rev.A September 2021