Table of Contents
Advertisement
All manuals and user guides at all-guides.com
When you have completed the Dolby Pro
Logic setup, you are ready to enjoy Home
Cinema sound.
• Press DPL (PRO
DPL
TEST T
LOGIC) repeatedly to
select and cycle
through the various
PRO LOGIC
sound modes.
Dolby Surround ™ Dolby Center
Phantom ™ Dolby 3 Stereo ™
Stereo ™ Dolby Surround ...
™ The Dolby Pro Logic display panel
will light up with the selection.
pg 01-31/P88/22-Eng
9
Dolby Surround
Dolby 3 Stereo
This setting is for a full Dolby Surround Pro
Use this setting when full surround is not
Logic mode.
required, but a wide stereo sound is
desired. It only requires the left, right and
• Press DPL to select the Dolby Surround
center speakers.
mode.
™ The message
• Press DPL to select the Dolby 3 Stereo
"DOLBY
mode.
LEFT
CENTER
RIGHT
SURROUND"
™ The message
will be
SURR
SURR
displayed.
™ The DPL display panel will light up.
™ The DPL display
Dolby Center Phantom
This setting is for use without the center
Normal Stereo
speaker. It redistributes the center speaker
sound to the left and right speakers,
This setting is for normal stereo sound
providing conventional stereo across the
without Dolby Pro Logic. It only requires the
front.
left and right speakers.
• Press DPL to select the Dolby Pro Logic
• Press DPL to select the Stereo mode.
Center Phantom mode.
™ The message
™ The message
"DOLBY
CENTER
LEFT
CENTER
RIGHT
™ The DPL display
PHANTOM"
SURR
SURR
will be
displayed.
™ The DPL display panel will light up.
Important!
1 For the best Dolby Pro Logic sound,
switch on DPL with DSC set to
"Classic" and with VEC off.
2 Dolby Pro Logic mode will
automatically switch to normal
Stereo mode when headphones are
connected.
3 Switch to normal stereo mode when
"DOLBY 3
you record on a tape.
LEFT
CENTER
RIGHT
STEREO" will
be displayed.
SURR
SURR
panel will light up.
"STEREO" will
LEFT
CENTER
RIGHT
be displayed.
SURR
SURR
panel will light
up.
3/6/00, 1:26 PM
DOLBY PRO LOGIC
9
3139 116 19721
Advertisement
Table of Contents
