Table of Contents
Advertisement
All manuals and user guides at all-guides.com
Personal Setting
You can adjust the personal setting to your
desired level with the JOG control.
1 Press and hold PERSONAL for about 5
seconds to switch on the personal
setting mode.
™ "SELECT PRESET NUMBER"
will be displayed.
2 Adjust the JOG to select the desired
preset number for personal setting and
press á to confirm the selection.
™ "ADAPT LOW FREQ LEVEL" will
be displayed.
3 Adjust the JOG to select the desired
Spectrum Analyzer band level for low
frequency.
™ The level will increase or decrease
between+3 and -3.
4 Press á to confirm the selection.
™ "ADAPT MID FREQ LEVEL" will
be displayed and the next followed
by "ADAPT HIGH FREQ
LEVEL".
• Repeat step 3 - 4 to select the desired
mid and high frequencies Spectrum
Analyzer band levels.
5 You can choose to edit the name for the
personal setting.
™ The first character of setting name
will be flashing.
pg 01-31/P88/22-Eng
15
6 Adjust the JOG to select the desired
DIGITAL SOUND CONTROL (DSC)
alphabet, number or symbol.
The DSC feature enables you to adjust the
™ "A to Z", "0 to 9" or "*, -, +, \, /, _".
system to suit your type of music.
7 Press á to confirm the selection.
1 Press to select the DSC feature.
™ The next character for editing will be
2 Adjust the JOG to select the desired
flashing.
Digital Sound Control setting :
• Repeat step 6 - 7 to store up to 10
OPTIMAL, CLASSIC, TECHNO, VOCAL,
characters.
ROCK or JAZZ.
8 To store the setting, press PERSONAL
™ The selected digital sound is
again.
™ "OPTIMAL, CLASSIC, TECHNO,
• Before storing the setting, you can
press à to retrace the steps in the
reverse order.
• To exit without storing the setting,
Note:
press Ç .
– For neutral setting, select CLASSIC.
Notes:
– During personal setting, if no button is
VIRTUAL ENVIRONMENT CONTROL
pressed within 90 seconds, the system
(VEC)
will exit personal setting mode
The VEC feature enables you to adjust the
automatically.
system to select a type of environment.
– wOOx level cannot be stored as part of
1 Press to select the VEC feature.
the personal setting.
2 Adjust the JOG to select the desired
– It is not possible to adjust Bass/Treble
Virtual Environment Control setting :
level during personal setting, " USE
HALL, CLUB, DISCO, CINEMA,
JOG " will be displayed.
CONCERT or ARCADE.
™ The selected environment is
™ "HALL, CLUB, DISCO,
OPERATING THE SYSTEM
BASS/TREBLE
The BASS/TREBLE features enable you to
define the sound processor settings for
Bass and Treble.
1 Press to select the BASS/TREBLE
feature.
™ The BASS and TREBLE LED will be lit.
™ "ADAPT BASS AND TREBLE
LEVELS" will be displayed.
encircled.
2 Use BASS/TREBLE CONTROL to select
the desired BASS or TREBLE level
VOCAL, ROCK or JAZZ" will be
respectively.
displayed.
™ The BASS/TREBLE level will increase
or decrease between level +3 and
-3.
• Press BASS 3 or 4 to select the low
tone level.
™ "BASS -X or BASS +X" will be
displayed.
• Press TREBLE 3 or 4 to select the
high tone level.
™ "TREBLE -X or TREBLE +X"
will be displayed.
Note:
– " X " denotes the sound level.
encircled.
CINEMA, CONCERT or
ARCADE" will be displayed.
3/6/00, 1:26 PM
15
3139 116 19721
Advertisement
Table of Contents
