User Interface Description - Honeywell Notifier LCD6000N Installation Manual

USER INTERFACE DESCRIPTION

NORMAL CONDITION
The following screen is displayed when the panel LCD6000 there are no fault conditions (alarm or fault):
Panel icon status.
In normal condition, without alarm and fault, the NOTIFIER trademark symbol is present.
In the presence of points or zone not included an exclamation is displayed (!).
In alarm condition the symbol Flame is displayed.
In fault condition the symbol Triangle is displayed.
Note: The alarm state prevails in the event that the panel is alarm and fault condition simultaneously.
Date - Time
LCD6000N
LCD6000N_manu-inst
Serial connection RS485 status
In case of failure on the serial connection
"OFF LINE" will displayed.
Installation Manual
Doc. M-183.1-LCD6000N-ENG Rev A.2
Counter areas
in alarm
Counter areas in fault
Counter system fault
Counter zone
excluded
Serial connection icon status.
In case of failure on the serial
connection the icon will
displayed as follow:
PAGE - 5
NOTIFIER ITALIA