Power Cord - Bissell CLEANVIEW 80Q2 User Manual

O
perations

Power cord

The power cord is located at the rear of
the vacuum. Gently pull out the power
cord, watching for the yellow line. Stop
pulling the power cord once the yellow
line is visible. There is also a red line,
which indicates the end of the usable
cord. Do not pull the power cord out
beyond the red line.
Automatic cord rewind
Your vacuum is equipped with an
automatic cord rewind. When cleaning
is finished, press the power button
OFF ( )and grasp the plug to
disconnect from the electrical outlet.
Hold the plug and press the
automatic cord rewind button to
rewind the cord automatically.
6
w w w . b i s s e l l . c a
Automatic Cord
Rewind Button
CAUTION:
Be careful to avoid injury as
cord retracts very quickly.
1 - 8 0 0 - 2 6 3 - 2 5 3 5