Stihl MS 231 Manual page 30

1 2
: Attach the brake cable (1) to the
bore (arrow) in the brake
lever (2).
2
1
: Slide the brake cable retainer
with lug (1) through the opening
and press it into its seat (arrow).
: Insert and tighten down the
screw (2) firmly.
MS 231, MS 231 C, MS 251, MS 251 C
All manuals and user guides at all-guides.com
1
2
When lifting the tank housing make
sure the grommet (1) is pushed fully
into the adjusting screw (2) – if this
is not the case, the adjustment of
the brake cable will vary.
– Check position of fuel hose and
correct if necessary, b 12.11.2
– Check position of fuel return hose
and correct if necessary,
b 12.11.3
– Lift the tank housing and secure it
in position, b 12.11.2
1
: Position the brake cable (1) in the
guide (arrow).
– Install the switch lever, b 10.3.1
– Install the throttle trigger, b 10.3
– Reassemble all other parts in the
reverse sequence.
– Check operation and adjust the
brake cable, b 5.4.1
5.5 Chain Tensioner
– Troubleshooting, b 3.2
2
3
1
: Turn the spur gear (2) clockwise
until the tensioner slide (1) butts
against the right-hand end and
the screw (3) is visible.
: Take out the screw (3).
: Pull out the spur gear (2) and
tensioner slide (1).
29