DaytonAudio DTA-120BT User Manual

Specifications:
Power Output: 60 watts RMS x 2 into 4 ohms
Total Harmonic Distortion:
<0.1% @ 1W per channel
<10% @ 60W per channel
Minimum Speaker Impedance:
4 ohm
Bluetooth Version: 4.2 with aptX
Signal-to-Noise Ratio:
103 dB, A weighted
Input Impedance: 10k ohms (minimum)
Input Sensitivity:
680 mV
Frequency Response: 20-20,000 Hz
Channel Separation:
95 dB
Efficiency: > 8
Dynamic Range:
>100 dB
Electrical Requirement: 24VDC @ 5A center positive
Dimensions:
2" H x 3.375" W x 6.875" D
Weight: 1.2 lbs
Package Contents:
• DTA-120BT 120W Digital Class D Amplifier
• World compatible 24V@5A switching power supply
• 2 sets of screw-type banana plugs for speaker connection
• 3.5 mm to 1/4" headphone adapter
• 3.5 mm to 2 RCA "Y" cable
• 6" 3.5 mm audio cable
Important Safety Instructions
To reduce the risk of electric shock, do not remove cover. No user
serviceable parts inside. Refer servicing to qualifi ed personnel. To
reduce the risk of fi re and shock do not expose unit to rain or moisture.
The unit should be connected to an earth grounded AC electrical
socket. The unit should be operated in a well ventilated area. Minimum
clearance is 2 inches from the ventilation openings.
5-Year Limited Warranty
See daytonaudio.com for details
daytonaudio.com
tel + 937.743.8248
info@daytonaudio.com
Dayton Audio
®
5 %
705 Pleasant Valley Dr.
Springboro, OH 45066
USA
Last Revised: 11/29/2017
CLASS D MINI
AMPLIFIER 60 WPC
WITH BLUETOOTH
Model: DTA-120BT User Manual