Table of Contents
Advertisement
Wi-Fi
Network
Tap WIFI/NETWORK SETUP to configure the Wi-Fi network that will
be used by the Data Logger.
Access Point
SSID
Security Type
P e r s o n a l S e c u r i t y
Type
Security KEY/PIN
DHCP/Static (Auto/
Manual)
30
Select a network to use from the list of
searched Wi-Fi networks. The closer the
signal strength is to 0 dBM, the stronger the
connection. If possible, use a Wi-Fi network
with a signal strength of -70 dBm or higher.
The selected SSD will appear.
Select the type of security that your Wi-Fi
network uses.
If Security Type is set to Personal, select the
current security type.
Enter your Wi-Fi password.
If DHCP is selected, the router will randomly
assign an IP Address. If a static IP address
is needed, select Static and configure
additional settings.
Advertisement
Table of Contents
