Advertisement
Available languages
Available languages
16. Error messages
In case of problems, the following error messages will be sent via the data connection and on to the display :
- ERR0 : Error of the reading sensor
- ERR1 : Error of parity
- ERR2 : Error in the received remote command
- ERR3 : Overflow of the measuring range
- ERR8 : Memory error
- ERR9 : Critical error, the device must be revised
- No Data : Bluetooth
transmission error
®
The errors 0 and 3 must be confirmed by the button [MODE] or [SET], and then the device must be reinitialised.
The Error 'No Data' must be confirmed by button [MODE] or [SET]
22
Advertisement
