Before You Clean - Bissell PROHEAT2X 20B4 User Manual

O
perations

Before you clean

1. Move furniture to another area if
cleaning an entire room (optional).
2. Vacuum area with a dry vacuum
cleaner thoroughly before deep cleaning.
3. Plan your cleaning route to leave an exit
path. it is best to begin cleaning in the
corner farthest from your exit.
4. Pretreating (optional)
Pretreating is recommended to improve
cleaning effectiveness for heavily soiled
carpet in high traffic areas such as
entryways and hallways.
Option A: BISSELL Tough Stain PreTreat
A. Spray the biSSell tough Stain
Pre-treat formula onto heavy traffic
areas, soiled areas, or stains.
B. Allow to penetrate for at least 3 minutes.
C. clean as normal, using the biSSell
ProHeat 2X machine on the high
traffic setting, following the
instructions below.
Option B: CleanShot
follow instructions on page 12.
w w w . b i s s e l l . c o m
ATTENTION:
Some berber carpets have a
tendency to fuzz with wear.
Repeated strokes in the same
area with an ordinary vacuum
or deep cleaner may aggra-
vate this condition. Please see
Stain Removal instructions on
page 14.
8 0 0 . 2 3 7 . 7 6 9 1
9