Switching Your Unit On/Off; Using Your Freecom 4X; Pairing Your Unit To Bluetooth Devices - Cardo Systems FREECOM 4x Manual

TIP: You can check the battery charge at any time by saying "Hey Cardo, battery status."
●

2.3 SWITCHING YOUR UNIT ON/OFF

To switch your FREECOM 4x on:
Press both and
●
The speaker plays an ascending tone and a voice message greets you.
The LED confirms your FREECOM 4x is on:
Normal and low battery — LED flashes blue three times.
●
Charging — LED flashes red.
●
To switch your FREECOM 4x off:
Press both and
●
The LED flashes red three times, confirming that your unit is switching off. The speaker plays a descending
tone and a voice message.
2.4 USING YOUR FREECOM 4X
You can operate the various features of your FREECOM 4x in the following ways:
Press a button or combination of buttons on the unit
●
Use the Cardo Connect App on your mobile device (once it is paired with the unit)
●
Use natural voice operation (by saying a command, for example "Hey Cardo, Radio On")
●

2.5 PAIRING YOUR UNIT TO BLUETOOTH DEVICES

Your FREECOM 4x has two Bluetooth channels for connection to Bluetooth devices such as mobile phones, GPS
devices, and Bluetooth music players with A2DP.
for 2 seconds.
for 2 seconds.
5