First Use Of Product - Malloca MF-246EBI Operation Instruction Manual

First use of product

Preparations before using refrigerator
Remove all packaging materials including the foaming base and the adhesive
tapes to fix the accessories.
Check the accessories and materials
Please check the parts inside package according to packing list. If there is
difference, please consult the seller.
Place the refrigerator in proper position.
Please clean the refrigerator before use(refer to the chapter "clean of
refrigerator" on page 22)
After the refrigerator is leveled and cleaned, please wait 2 hours before
connecting to the power supply.
Remove the protection film
Please remove the protection film before use to guarantee the heat
dissipation of refrigerator.
Steps for first use of product
Connect to
power supply
After first connecting to
power supply, it will take
several hours for refrigerator
to complete the refrigeration.
The default preset
temperature is:
refrigerator compartment(5℃)
freezer compartment(-18℃)
Tips: After changing the temperature setting, it will take some time before the cabinet temperature reach
balance.The length of time depends on ambient temperature,frequency of opening refrigerator doors and
the food storedin refrigerator.
Put the food
inside refrigerator
The food can be put into refrigerator
2-3 hours after connecting to power
supply.Please do not store too much
food in freezer compartment. The
total weight of the food stored in
each shelf should not be more
than 24kg.
Using
refrigerator
Keep the refrigerator running
for 24 hours to reach the
steady state after putting the
food inside refrigerator. After
that, the temperature can
be changed.