Advertisement
2-1 TUNER SECTION
Use a screwdriver with a plastic or ceramic grip for all adjustment.
2-1-1 FM adjustment
1. Set the function switch to the FM position.
2. Connect the signal generator output through a 75 ohm dummy
antenna to "ANT" on MAIN PCB.
3. Connect the oscilloscope to the speaker terminal.
4. Set the signal generator as listed in the alignment chart.
2-1-2 AM adjustment
1. Set the function switch to the AM position.
2. Connect the test loop antenna across the output of the signal generator.
3. Connect the oscilloscope to the speaker terminal.
4. Set the signal generator as listed in the alignment chart.
2-2 Adjustment and Test Points
All manuals and user guides at all-guides.com
2 ADJUSTMENTS AND CHECKS
MC-DX10 TUNER PCB
MC-DX10
AM ANT COIL
T502
L501
CT501
T503
CT502
L502
CT504
CT503
3 3
Advertisement
