Advertisement
PARTS & REQUIRED TOOLS
KIT CONTENT LIST:
A. Seat Back
B. Seat Base
C. M8 x 25 Bolt (4)
REQUIRED TOOLS:
Safety Glasses
13mm Socket or Wrench
NOTICE
STEP 1
FIG 1
With seat base on its side, locate the long plastic trim clip. Pull downward to release the clip from
the lower frame (Fig 1). This will release the trim to access bolt hole locations for seat back brack-
et (Fig 2). Repeat process on other side.
BEFORE PROCEEDING WITH INSTALLATION, YOU MUST REMOVE THE EXISTING SEAT.
SAVE THE BOLTS THAT SECURED THE EXISTING SEAT TO THE VEHICLE. YOU WILL NEED
THOSE BOLTS TO ATTACH YOUR NEW SEAT TO THE VEHICLE.
FIG 2
M8 x 25 (x4)
3
Advertisement
