Advertisement
Quick Links
Advertisement
Summary of Contents for Quadratec Heritage Premium
- Page 1 Quadratec Heritage Premium Seats ®...
-
Page 2: Before You Begin Installation
AND FREQUENTLY THEREAFTER. DO NOT USE IF DAMAGED. A FEW WORDS ABOUT PRODUCT SAFETY: Your Quadratec Jeep product is intended to enhance the utility and enjoyment of your off-road capable vehicle. Follow safety information and installation recommendations. Throughout these instructions is important safety information that is generally preceded by one of three signal words indicating the relative risk of injury, property damage or adverse consequence. -
Page 3: Kit Content List
PARTS & REQUIRED TOOLS KIT CONTENT LIST: A. Seat Back B. Seat Base C. M8 x 25 Bolt (4) REQUIRED TOOLS: Safety Glasses 13mm Socket or Wrench M8 x 25 (x4) BEFORE PROCEEDING WITH INSTALLATION, YOU MUST REMOVE THE EXISTING SEAT. NOTICE SAVE THE BOLTS THAT SECURED THE EXISTING SEAT TO THE VEHICLE. - Page 4 STEP 2 FIG 4 FIG 3 Lay seat base flat on work surface (Fig 3). Position seat back to slide brackets into slots in the fabric in the rear of the seat base. This motion will follow the path of the arrow shown (Fig 4). STEP 3 FIG 6 FIG 5...
- Page 5 STEP 4 Using a 13mm socket or wrench, tighten bolts FIG 7 to hold bracket (Fig 7). Do not fully tighten at this time. Repeat previous steps for other side. After both sides are attached, tighten each bolt securely. STEP 5 FIG 8 After you removed an old seat from riser, reuse those bolts for reattachment.
- Page 6 3 years from date of initial retail sale. Quadratec reserves the rights to: (a.) require invoice or other proof your accessory is within the terms of this Limited Warranty as a condition of warranty service and, (b.) make future revisions to this product and Limited...