Optional) Setting The Hibernation Parameter; Setting Communication Parameters; Installing Ac Input Power Cable - La Marche DCPS Installation And Operation Manual

Main
Menu
5.5

(Optional) Setting the Hibernation Parameter

CAUTION
:
Before hibernating rectifiers, ensure that the upper-level circuit breaker can endure a current greater
than the maximum input of the power system.
Set Hibernation enable to Enable if you need to use the intelligent hibernation function of the rectifiers.
Main Menu
Parameters
Settings
5.6

Setting Communication Parameters

5.6.1 Installing AC Input Power Cable

Procedure
Step 1 Apply to the site or equipment room network administrator for a fixed IP address.
Step 2 Set the IP address, subnet mask, and gateway on the LCD, as shown in Table 15.
Main Menu
Setting Wizard
Second- Third-
Level Level
Menu Menu
Other
Parameters
Table 13 – Setting battery parameters
Second-Level Third-Level
Menu Menu
Energy Saving Hibernation
enable
Table 14 – Setting the hibernation parameter
Second-Level Third-Level
Menu Menu
Network IP Address
Parameters
Subnet Mask
Fourth- Default
Value
Level
Menu
Rated 150 Ah
Capacity
Installation 2010-01-01
Time
Default Value
Disable
Default Value
192.168.0.10
255.255.255.0
Setting
Value
No.
Capacity of
one battery
string
Set to the
current date
Setting Value
Enable
Setting Value
Set this
parameter based
on the address
assigned by the
network
administrator.
Set this
parameter based
on the address
assigned by the
25