Getting Started - Belkin OMNIVIEW F1DA208Z User Manual

Installation

Getting Started:

Step 1
Make sure that all servers and PRO3 Dual-User KVM Switches are powered off.
Step 2
Place all primary and secondary KVM switches in the desired location.
Step 3
Connect the console monitor, keyboard, and mouse to the console ports of the
primary switch (BANK 00). Refer to "Connecting the Console to the PRO3 KVM
Switch" on page 9.
Connecting the Primary and Secondary KVM Switches:
Step 1
Using the Daisy-Chain Cable (F1D109-XX), connect one end to the
"Daisy-Chain In" port on the primary KVM switch (BANK 00).
Step 2
Connect the other end of the Daisy-Chain Cable (F1D109-XX) to the
"Daisy-Chain Out" port of the first secondary KVM switch (BANK 01).
Step 3
To add secondary units, connect one end of the Daisy-Chain Cable
(F1D109-XX) to the "Daisy-Chain In" port on the first secondary KVM switch
and the other end to the "Daisy-Chain Out" port of the next secondary
KVM switch (for example, BANK 01).
Step 4
Repeat Step 3 for additional PRO3 KVM Switches you wish to
daisy-chain together.
1
2
3
4
5
6
7
8
17