4.3 Configuring ZigBee Setting
1.
Launch the "ZT Configuration Utility" and click the [ZT Series] button.
2.
Click the [Serial Port] icon and then select the COM Port number.
1
3.
After selecting the COM Port number, a list of model numbers will be
displayed. Select the name of the module that you want to configure.
After clicking the button, the utility will begin checking the connection.
3
ICP DAS, ZT‐2510 Series User Manual, Version 1.0
Copyright @ 2012 by ICP DAS Co., Ltd. All Rights Reserved.
2
Page 11