Connecting The Power And Host Pc - ICPDAS ZT-2510 Series User Manual

D.
"RF Power" is the transmit power.
Code
0x0F
0x08
0x00
※ The parameter adjustment purely personal behavior, ICP DAS can not
guarantee to pass CE/FCC certification if adjusting this parameter, nor
assume any liability because of the adjustment parameters derived from
the RF Power.
4.2 Connecting the Power and Host PC
1.
Connect the interface USB port for doing configuration.
ICP DAS, ZT‐2510 Series User Manual, Version 1.0
Copyright @ 2012 by ICP DAS Co., Ltd. All Rights Reserved.
Note
Typical Maximum
Fit the CE/FCC certification
Typical Minimum
CA‐0915
Windows Based PC
Page 10