Table of Contents
Advertisement
UsINg THe Web-based adVaNCed UseR INTeRfaCe
sections
table of contents
Changing system settings
The "System Settings" page is where you can enter a new administrator
password, set the time zone, enable remote management, and turn on
and off the NAT function of the Router.
setting or Changing the administrator Password
The Router ships with NO password entered. If you wish to add a
password for greater security, you can set a password here. Write down
your password and keep it in a safe place, as you will need it if you
need to log into the Router in the future. It is also recommended that
you set a password if you plan to use the remote management feature
of your Router.
N Wireless Router
1
2
3
4
5
6
Changing the login Time-out setting
The login time-out option allows you to set the period of time that you
can be logged into the Router's advanced setup interface. The timer
starts when there has been no activity. For example, imagine you have
made some changes in the advanced setup interface, then left your
computer alone without clicking "Logout". Assuming the time-out is set
to 10 minutes, 10 minutes after you leave, the login session will expire.
You will have to log into the Router again to make any more changes.
The login time-out option is for security purposes and the default is set
to 10 minutes.
Note: Only one computer can be logged into the Router's advanced
setup interface at one time.
61
7
8
9
10
Advertisement
Table of Contents
