How To Operate - Vax MACH 5 Instruction Manual

U90-M5 & U90-M6 Series User Guide.qxd:VZL-6015 & 6016
vax.co.uk
Position Tools
Place smaller diameter end of extension tube (A) into
bottom of rack. Snap extension tube into clip at top.
Repeat with other extension tube.
Crevice tool (B) fits into one of the extension tubes.
Fit 2-in-1tool (C) and TurboTool (D) into storage areas on
side of cleaner as shown (Fig.3/13).
D
C
Fig.3/13
6
assembly / operation
All manuals and user guides at all-guides.com
B
A
9/9/09 16:45

4. How to operate

On/Off Switch
Plug cord into electrical outlet. To turn cleaner ON, push
ON/OFF switch once. To turn cleaner OFF, push switch
again (Fig.4/1).
Fig.4/1
The cleaner is shipped with the brushbar in the OFF
position. To turn the brushbar ON, step on the pedal (A).
The indicator (B) will show red in the "Brushbar on"
window (Fig.4/2).
Fig.4/2
Cord Rewind
Grasp the end of the plug and pull to release cord from
cord reel. After desired cord length is reached, the cord
will lock into position.
To return cord for storage, hold plug and press on button
(A) at top of cord reel (Fig.4/3).
NOTE: To prevent cord from whipping, hold plug until
cord is rewound.
Page 6
B
A