Table of Contents
Advertisement
INsTAllINg ANd seTTINg UP The AdAPTers
sections
table of contents
overview
Installation of the Powerline AV Networking Adapter takes only seconds
and does not require setting up long wires throughout the house . Simply
plug the units directly into any available wall outlet and connect to any
device with an Ethernet port . Users have the option to randomly change
the security password for their powerline network .
Powerline AV Networking Adapter
1
5
2
hardware setup
1.
Plug your network cable into the device's RJ45 network
adapter port .
2.
Plug the other end of your network cable into the RJ45 port located
at the back of the Adapter .
3.
Plug the power cable or wall adapter into the power connector at
the back of the Adapter .
4.
Insert the power plug of your power cable or wall adapter directly
into a power outlet in the wall .
NoTe: do not plug the device into a UPs or power strip with
surge protection as they may filter the powerline signal.
5.
Repeat this process for the second Adapter .
3
4
Advertisement
Table of Contents
