Electrical Connection; Hints For Test Centres - Zanussi ZDI 6052 Instruction Book

Electrical connection

Before plugging the appliance into the wall socket, make sure
that:
1. The mains voltage corresponds to the voltage given in the
"Technical specifications".
2. The meter, fuses, mains power supply and wall socket can
all take the maximum load required.
Make sure that the socket and plug are compatible without
having to use any type of adaptor. If necessary, have the
domestic wiring system socket replaced.
Safety standards require the appliance to be earthed.
The manufacture accepts no liability for failure to observe
the above safety precautions.

Hints for test centres

Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid dispenser.
Test standard:
Reference programme:
Load:
Rinse aid selector:
Detergent dosage:
Arrangement upper basket
All manuals and user guides at all-guides.com
EN 50242
Bio 50°C
12 standard place settings
position 5
25 g in the dispenser
5 g on the dispenser lid
Arrangement lower basket
15
Arrangement cutlery basket