Signal Information; Ca Module (Conditional Access) - Beko 19WLP530HID Operating Instructions Manual

3.5.8 Channel List
CHANNEL LİST
Channel 1
Channel 2
Channel 3
Channel 4
Select
3.6

Signal Information

Channel
Network
Modulation
Quality
Signal Strength 90%
3.7

CA Module (Conditional Access)

In this menu, you can check the CA Module settings. If a CI module is inserted for a
channel that has a scrambled broadcast, then a submenu for that module is opened
and the information for that module is updated.
Helpdesk: 0845 600 4911
If you press OK button when no menu is open, Channel
List menu will be displayed on the screen.
You can see all the channels of the current mode while you
are in the Channel List menu, you can select the desired
channel with Up/Down buttons and view it by pressing the
OK button.
Exit
Signal Information
23 490 Mhz
XX Network
2X 64XXX X2/3
60%
Exit
This menu gives information about Channel,
Network, Modulation, Signal level and quality.
Press MENU button to enter this menu.
Select Channel Setup menu by pressing
the Right/Left movement buttons. Select
Signal Information tab by pressing the
Down movement button and confirm with
Right movement button or OK button. Signal
Information menu will be displayed.
Note: Signal Information menu will be active
only for Digital broadcasts.
-19-