Tuning Your Television; Turning On Your Television For The First Time And Tuning; Performing Digital Channel Settings - Beko 19WLP530HID Operating Instructions Manual

3

TUNING YOUR TELEVISION

3.1

Turning on your television for the first time and tuning

Language Settings
Auto tuning
Select
right navigation button. Country Selection menu will be displayed. Make the Country
and Scan Type selections by pressing the Up/Down, Left/Right navigation buttons.
If the aerial connections are correct, press OK button to start Auto Tuning.
Press EXIT button to cancel the Auto Tuning
3.2

Performing Digital channel settings

You can tune the Digital programs automatically or manually and store them in your
television.
3.2.1 Automatic tuning of digital channels and storing in the memory
Please select country and scan type, then press OK to start tuning
Country Selection
Scan Type
Scroll to the Country Selection tab by pressing the
Up/Down movement buttons and press Right/Left
movement buttons to select your country. Then, scroll
to the Scan Type tab by pressing the Down movement
button and select DTV option by pressing the Right/
Left movement buttons. Press OK button to confirm
your selections. Digital channels are searched and stored
automatically. At the same moment, the progress of
auto tuning and the channels stored in the memory are
displayed in the menu.
Program Table menu is displayed at the end of the Auto
Tuning.
Note: If you wish to search the Digital and Analogue channels concurrently,
choose Scan Type as Digital and Analog from the Auto Tuning menu.
Helpdesk: 0845 600 4911
Installation Guide
English
Exit
CHANNEL SETUP
England
DTV
Back
Select
Exit
Installation Guide menu will be displayed on
the screen when you turn on your television for
the first time.
The TV is factory set for UK / English use.
If no language settings are reqired simply
Press the OK button twice to start TV channel
tuning. Press Right/Left navigation / arrow
buttons to select the desired menu language
from the Language tab. Select Auto Tuning
by pressing the down navigation button and
confirm your selection with OK button or the
Press the MENU button on your
remote control. Select CHANNEL
SETUP by pressing the Right/Left
movement button and confirm your
selection with OK button. Select
Auto Tuning tab by pressing the
Up/Down movement buttons and
press Right movement button or OK
button to confirm. Country Selection
menu will be displayed.
-13-
Searching
%1 68 MHz
1 C-03
2 C-04
Exit