Table of Contents
Advertisement
Environment
Avoid using the deck in the following conditions:
• In areas with high temperatures (near a heater, exposed to
direct sunlight, for example).
• In areas with extremely low temperatures.
• In areas where there is excessive humidity.
• In a dusty atmosphere.
• In areas where power line voltage fluctuations are severe
(in which case the use of a voltage regulator may be
advisable).
Cleaning the Tape-Handling Parts
Dirt, dust, or particles of the tape's coating can accumulate on
the tape heads and other parts that the tape touches. This can
greatly reduce the performance of the cassette player. After
every 20 hours of tape player operation, follow these steps to
clean the tape-handling parts or use a cassette deck cleaning kit
(available at your local RadioShack store).
1. Disconnect the power source.
2. Open the cassette compartment door and press
to expose the tape-handling parts.
3. Use a cotton swab dipped in denatured alcohol or tape
head cleaning solution to clean the tape guides, record/
play head, erase head, pinch roller, and capstan.
4. When you finish cleaning, press
close the cassette compartment door. Then reconnect
power.
All manuals and user guides at all-guides.com
PLAY
.
and
STOP/EJECT
9
Advertisement
Table of Contents
