Preparation; Read This Before Operating; Connections - RCA SCT-520 Owner's Manual

PREPARATION

LINE OUT
Jacks

READ THIS BEFORE OPERATING

• Choose a location for your cassette deck carefully. Avoid
placing it in direct sunlight or close to a source of heat.
Also avoid locations subject to vibrations and excessive
dust, heat, cold, or moisture.
• Do not open the cabinet as this might result in damage to
the circuitry or electrical shock. If a foreign object should
get into the set, contact your dealer.
• When removing the power plug from the wall outlet,
always pull directly on the plug, never yank the cord.
• Do not attempt to clean the unit with chemical solvents, as
this might damage the finish. Use a clean, dry cloth.
• Keep this manual in a safe place for future reference.
6
All manuals and user guides at all-guides.com
LINE IN
Jacks

CONNECTIONS

Connect your cassette deck to your receiver or amplifier using
the supplied audio cables.
1. Using one of the audio cables, connect the cassette deck’ s
and jacks to the receiver or amplifier’ s left
L R LINE OUT
and right tape input jacks.
2. Using the other audio cable, connect the cassette deck’ s
jacks to the receiver or amplifier’ s tape output
LINE IN
jacks.
Note: If you are not sure which receiver/amplifier jacks to
use, refer to your receiver or amplifier’ s owner’ s manual.
3. Plug the AC power cord into an AC wall socket.
To AC Outlet