Advertisement
4. Press menu to show the current language setting.
5. Press rev
or
to select the desired language.
6. Press menu to again to store your language setting.
Setting the LCD contrast
This setting allows you to adjust the display contrast and
viewing angle for easier readability.
1. Place the handset in the cradle of the telephone base.
2. Press menu. The screen displays DATE/TIME.
3. Press rev
or
until CONTRAST appears.
4. Press menu to show the current contrast setting. There are
five levels of contrast (1 to 5), with the default set to 3.
5. Press rev
to increase the contrast or
to decrease the contrast.
6. Press menu again to store your contrast setting.
Setting the local area code
The Caller ID feature uses the programmed area code to
determine the number format to display when a valid Caller ID
signal is received.
1. Place the handset in the cradle of the telephone base.
2. Press menu. The screen displays DATE/TIME.
3. Press rev
or
until LOCAL AREA CODE appears.
4. Press menu to show the current local area code. The default
is ----.
5. The first digit flashes, indicating that it is ready to accept the
new area code entry.
6. Press rev
to select the first digit (0 to 9). When the desired
number is flashing, press rev
the next digit.
7. Repeat steps 5 and 6 until you have entered all the digits for
your area code.
-OR-
Press 0 to 9 on the dial key pad directly to enter the local
area code. The cursor moves to the next digit automatically.
8. Press menu again to store your new local area code.
NOTE: If you make a mistake, press the del key to reset your entries.
Setting the long distance code
You can configure your phone to store a 1-digit long distance
code.
1. Place the handset in the cradle of the telephone base.
2. Press menu. The screen displays DATE/TIME.
3. Press rev
or
until LONG DIST CODE appears.
4. Press menu to show the current long distance code.
5. Press rev
or
to select 1, 0, or <space> (default).
6. Press menu again to store your new long distance code.
Activating or deactivating call lock
You can activate or deactivate call lock on your phone.
To activate call lock
1. Place the handset in the cradle of the telephone base.
2. Press menu. The screen displays DATE/TIME.
All manuals and user guides at all-guides.com
until CONTRAST
13
to confirm and advance to
5. Press menu again. The screen displays CALL LOCK ON ! The
call lock icon appears at the corner.
To deactivate call lock
1. Place the handset in the cradle of the telephone base.
2. Press menu. The screen displays DATE/TIME.
3. Press rev
or
until LOCK appears.
4. Press menu. The screen displays CALL LOCK OFF ?
5. Press menu again. The screen displays ENTER PIN CODE. The
first digit flashes.
6. Press 0 to 9 on the dial key pad to complete the entry for PIN
code. The default is 0000.
7. If the PIN code is correct, the screen displays CALL LOCK OFF
! If the PIN code is incorrect, the screen displays INCORRECT
PIN ! and the deactivation fails.
NOTE: If you make a mistake, press the del key to reset your entries.
Changing PIN
You can change the PIN on your phone.
1. Place the handset in the cradle of the telephone base.
2. Press menu. The screen displays DATE/TIME.
3. Press rev
or
until CHANGE PIN ? appears.
4. Press menu. The screen displays ENTER PIN CODE. The first
digit flashes.
5. Press 0 to 9 on the dial key pad to complete the entry for PIN
code. The default is 0000.
6. After a correct PIN is entered, the screen displays ENTER
NEW PIN.
7. Press 0 to 9 on the dial key pad to enter the new PIN. The
screen displays RE-ENTER PIN.
8. Press 0 to 9 on the dial key pad to re-enter the new PIN. The
screen displays PIN SAVED! The PIN code is changed.
Setting the dialing mode
You can choose between touch-tone dialing or pulse (rotary)
dialing for your telephone. The telephone is preset for touch-
tone dialing.
1. Place the handset in the cradle of the telephone base.
2. Press menu. The screen displays DATE/TIME.
3. Press rev
or
until T/P DIAL MODE appears.
4. Press menu to show the current dialing mode.
5. Press rev
or
to select either TONE DIAL or PULSE DIAL.
6. Press menu again to store your new dialing mode.
Setting the flash time
Flash time is the value used by either the local telephone
company or PBS system to identify a soft "on-hook" signal. You
can set the flash time for your phone.
1. Place the handset in the cradle of the telephone base.
2. Press menu. The screen displays DATE/TIME.
3. Press rev
or
until FLASH TIME appears.
4. Press menu to show the default flash time setting.
5. Press rev
or
to change the flash time value (100 MS to
900 MS, each increment is 100 MS).
6. Press menu again to store your new flash time.Ocultis confit
viris, publica; C. munique viviri sulica dum nox se culto
consupiorum inulintim mo haciendam se cotanum iam vit, C.
Ur, unum supiem tum intentimus impra? Otatiliceps, Palibul
15
Advertisement
