Table of Contents
Advertisement
SYMPTOM
The adapter is not connected
No power
The unit is in power off mode
Volume level in minimum position
No sound or
sound weak
The paired/connected device
is not in playback mode
Input source incorrect
Sound distortion/rattle
Volume level too high
Remote Control
Out of range
not functioning
The battery in the remote
control is drained
Bluetooth
The external device is
too far from the unit
Reception failure
Have not paired
TROUBLESHOOTING
POSSIBLE CAUSE
16
POSSIBLE SOLUTION
Connect the adapter to the unit and
wall outlet
Press and hold the power/source button
on the unit or press the
on remote control to power on the unit
Raise the volume level by pressing
the + Button on the unit
Or press VOL+ button on remote control
Play
music/movie
in
the
Connected device as usual and make
sure the volume level of it is in high
level.
Press the power/source button repeatedly
or press the source button on remote
control to switch to desired mode
Reduce the volume level by pressing
The volume- Button on the top of the unit
Or press VOL- button on remote control
Reduce
the
volume
level
paired/connected device.
Point the remote control to the
remote sensor on the unit within
16 feet, +/-30 degrees
Replace with new battery
Put the external BT device close to the
unit.
Pair the unit with the BT Device as the
Procedures stated in this manual.
button
paired/
of
the
Hide quick links:
Advertisement
Table of Contents
