General Operation - Monster MSB3788W Quick Start Manual

1. Connect the DC 15V, 2.4A Adapter to the DC IN jack on the Unit. Plug the
Adapter into the AC outlet with AC110~240V; 50/60Hz. The mode indicator on
the Unit will light up and turn RED.
2. Connect the DC 15V, 2.4A Adapter to the DC IN jack on the subwoofer. Plug the
Adapter into the AC outlet with AC110~240V; 50/60Hz. The power indicator on
the subwoofer will light up and turn BLUE in flashing.
3. Connect the DC 5V, 1.0A Adapters to the DC IN jack on each of the satellite
speakers. Plug the Adapter into the AC outlet with AC110~240V; 50/60Hz. The
power indicator on the speakers will light up and turn RED/BLUE in flashing.
4. Press the button on the unit or press the
on the unit. After a few seconds, the unit will be connected with subwoofer and
satellite speakers automatically and the beep sounds can be heard separately.
5. The indicator on subwoofer will be solid BLUE. The indicator on the satellite
speakers will be solid RED(Right speaker)/BLUE(Left speaker).
IMPORTANT NOTE: If the pairing INDICATOR on the SUBWOOFER/SPEAKERS is off,
it means the Main Unit is not connected with the SUBWOOFER/SPEAKERS
successfully. Please operate as the steps below:
A: Press and hold the Bluetooth Pair button on the Main Unit for 3-5 seconds in the
power of model.
B: Press the button on SUBWOOFER/SPEAKERS to power off, then press the
button on SUBWOOFER/SPEAKERS once to power on again, the pairing INDICATOR
on SUBWOOFER/SPEAKERS will blink several times and then turn to solid color, it
means the SUBWOOFER/SPEAKERS is connected with Main Unit successfully.
C: Press the Bluetooth Pair button on the Main Unit again, the pairing INDICATOR will
be solid BLUE.
6. Press the source button on remote control or on the main unit repeatedly to
switch to the desired mode, the indicator on top of the unit will turn on:
Standby/Bluetooth Indicator............................................Bluetooth Mode (BLUE)
Line In Indicator............................................................LINE IN Mode (ORANGE)
Aux In Indicator .........................................................
5.1 CH Indicator . . .......................................................
Optical Indicator ......................................................OPTICAL IN Mode (WHITE)
USB Indicator......................................................................USB Mode (GREEN)

GENERAL OPERATION

button on remote control to power
12
......... AUX IN Mode (BLUE)
..... ....... 5.1 CH Mode (RED)