Advertisement
1. LSX4100 System Cleaning and Maintenance
1) Preventative Maintenance Safety instructions
- During the PM, turn off the kiosk.
- Only use recommended tools, test tools and cleaning tools.
- Before starting the PM, check if there is any module being turned off.
- Solenoid and mainboard can have high temperature.
2) Cleaning and maintenance
- In operation, clean dust and debris inside of the kiosk every six months.
- When removing dust, use vacuum to suck in the dust and debris.
- When blow the dust out, dust can get into the modules like card reader, CDU, and coin hopper, so dust can cause
an issue.
'● PM period: Every 6 months
▶ Pull RPU, Hopper, CPCDU, Bill Accepter shelfs to clean behind(back) of the shelfs.
▲ RPU backside
▲ CPCDU backside
GENMEGA INC
▲ Hopper backside
▲ Bill Accepter backside
LSX4100 PM MANUAL, REV1
Page 4
Advertisement
