Coin Hopper - Genmega LSX4100 User Manual

2.4 Coin Hopper

1) Cleaning tools
- Air Spray, Lubricant, Cotton Swab, Gloves, Wiper
2) Cleaning place
(1) Coin Exit Sensor (Light Guide)
- Dust and debris on the coin exit sensor may cause interruption of dispensing the Coin.
(2) Disk and main body
- May cause interruption of dispensing the Coin without cleaning dust and debris.
3) Disassembling and cleaning
(1) Pull the marking part with your hand, and disassemble the Hook.
GENMEGA INC LSX4100 PM MANUAL, REV1 Page 10